General Information And Safety Instructions - STG-BEIKIRCH CDs Technische Information Und Bedienungsanleitung

SHE chain drive CDs
1 General information
and safety instructions
Documentation: This documentation is exclusively valid for the
product or product range as stated in the type designation on the
cover and must be applied comprehensively. This technical do-
cumentation must be read carefully before installation. Follow the
guidelines. Contact the manufacturer if you have any questions
or problems. This documentation should be retained for future
reference.Subject to technical modifictionsDiagram is not binding.
User: This documentation is aimed at trained, professional electri-
cians with safety awareness, who are familiar with mechanical
and electrical equipment installation, accident prevention regula-
tions and industrial compensation laws, and contains important
information for operators and
users.
Please observe the following safety instructions which are em-
phasized by special symbols.
Caution: Danger to persons due to electricity.
Attention: Danger to persons due to risks arising from
the operation of the equipment. Danger of crushing/trapping.
Warning: Non-observance leads to destruction.
Danger to material due to incorrect handling.
Important information
Use according to regulations: The product may
only be used for the functions and applications detailed, and in
accordance with the accompanying documentation. Unauthorised
electrical and mechanical modifications are not permitted and will
invalidate warranty and liability.
Transport and storage: The product may only be transported and
stored in its original packaging. It must not be knocked, dropped,
or exposed to moisture, aggressive vapours or harmful environ-
ments. More detailed transport and storage instructions provided
by the manufacturer must be observed.
Installation: Installation and assembly may only be carried out by
trained professional electricians, in accordance with the recog-
nised rules of engineering as well as the technical documentation
provided here. This will guarantee that the product will function
safely during operation. Care should be taken that all mechanical
components are fixed. Immediately after installation the electri-
cal and mechanical components should be checked to ensure
that they function correctly, and the tests and the results thereof
should be documented.
Please keep these operating instructions for future reference and maintenance. Subject to technical modifications. Diagram is not binding.
20
Operation: Safe operation is guaranteed if the acceptable rated
values and guidelines regarding maintenance information stated
in this documentation, as well as supplementary information
provided by the manufacturer, are followed.
Malfunction: If a malfunction is identified in the course of installati-
on, maintenance, inspection etc., immediate
action should be taken to rectify the problem.
Repair and maintenance: Defective equipment must only be
repaired by the manufacturer, or by companies authorised by the
manufacturer. Only original spare parts may be used. Repairs
may only be carried out by trained professional electricians, in
accordance with the recognised rules of engineering as well as
the technical documentation provided here and supplementary
advice from the manufacturer. This will guarantee that the pro-
duct will function safely during operation. Care should be taken
that all mechanical components are fixed.
Immediately after repair the electrical and mechanical compo-
nents should be checked to ensure that they
function correctly, and the tests and the results thereof should be
documented.
Maintenance: If the product is used as part of a safety system
such as a smoke and heat extraction system (SHE), it must be
tested, maintained and if necessary repaired at least once a year
as specified by the manufacturer or in line with DIN EN 18232-2
Smoke and heat control systems for instance. This is also recom-
mended for systems used purely for ventilation. If the product is
to be used in other safety systems, shorter maintenance intervals
may be necessary. With systems composed of control units, ope-
ning devices, control-sections etc., all components that interact
directly with each other are to be included in maintenance.
Maintenance must be carried out comprehensively
following the manufacturer guidelines and the accompanying
documentation. Components requiring maintenance must be
accessible. Defective equipment must only be repaired by the
manufacturer, or by companies authorised by the manufacturer.
Only original spare parts may be used. All components that have
a specified maximum operation time (such as batteries) must be
replaced within this time (see technical specification) with original
parts or manufacturer-approved parts. Regular inspection is
necessary to ensure that the equipment is ready for operation. A
maintenance contract with a recognised contractor is recommen-
ded.
04/13424999257