Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Louvre drive KLD M AC
1
General information
and safety instructions
Documentation: This documentation is exclusively valid for
the product or product range as stated in the type desig-
nation on the cover and must be applied comprehensively.
This technical documentation must be read carefully before
installation. Follow the guidelines. Contact the manufacturer
if you have any questions or problems. This documentation
should be retained for future reference.Subject to technical
modifictionsDiagram is not binding.
User: This documentation is aimed at trained, professional
electricians with safety awareness, who are familiar with
mechanical and electrical equipment installation, accident
prevention regulations and industrial compensation laws,
and contains important information for operators and
users.
Please observe the following safety instructions which are
emphasized by special symbols.
Caution: Danger to persons due to electricity.
Attention: Danger to persons due to risks
arising from the operation of the equipment.
Danger of crushing/trapping.
Warning: Non-observance leads to
destruction.
Danger to material due to incorrect handling.
Important information
Use according to regulations: The product
may only be used for the functions and applica-
tions detailed, and in accordance with the accompanying
documentation. Unauthorised electrical and mechanical
modifications are not permitted and will invalidate warranty
and liability.
Transport and storage: The product may only be transported
and stored in its original packaging. It must not be knocked,
dropped, or exposed to moisture, aggressive vapours or
harmful environments. More detailed transport and storage
instructions provided by the manufacturer must be observed.
Installation: Installation and assembly may only be carried
out by trained professional electricians, in accordance with
the recognised rules of engineering as well as the technical
documentation provided here. This will guarantee that the
product will function safely during operation. Care should
be taken that all mechanical components are fixed. Im-
mediately after installation the electrical and mechanical
components should be checked to ensure that they function
correctly, and the tests and the results thereof should be
documented.
12
Operation: Safe operation is guaranteed if the acceptable
rated values and guidelines regarding maintenance informa-
tion stated in this documentation, as well as supplementary
information provided by the manufacturer, are followed.
Malfunction: If a malfunction is identified in the course of
installation, maintenance, inspection etc., immediate
action should be taken to rectify the problem.
Repair and maintenance: Defective equipment must only be
repaired by the manufacturer, or by companies authorised
by the manufacturer. Only original spare parts may be used.
Repairs may only be carried out by trained professional elec-
tricians, in accordance with the recognised rules of enginee-
ring as well as the technical documentation provided here
and supplementary advice from the manufacturer. This will
guarantee that the product will function safely during opera-
tion. Care should be taken that all mechanical components
are fixed.
Immediately after repair the electrical and mechanical com-
ponents should be checked to ensure that they
function correctly, and the tests and the results thereof
should be documented.
Maintenance: If the product is used as part of a safety
system such as a smoke and heat extraction system (SHE),
it must be tested, maintained and if necessary repaired at
least once a year as specified by the manufacturer or in line
with DIN EN 18232-2 Smoke and heat control systems for
instance. This is also recommended for systems used purely
for ventilation. If the product is to be used in other safety
systems, shorter maintenance intervals may be necessary.
With systems composed of control units, opening devices,
control-sections etc., all components that interact directly
with each other are to be included in maintenance.
Maintenance must be carried out comprehensively
following the manufacturer guidelines and the accompa-
nying documentation. Components requiring maintenance
must be accessible. Defective equipment must only be re-
paired by the manufacturer, or by companies authorised by
the manufacturer. Only original spare parts may be used. All
components that have a specified maximum operation time
(such as batteries) must be replaced within this time (see
technical specification) with original parts or manufacturer-
approved parts. Regular inspection is necessary to ensure
that the equipment is ready for operation. A maintenance
contract with a recognised contractor is recommended.
01/13424999404
Werbung
Inhaltsverzeichnis
