Safety Instructions - STG-BEIKIRCH LM AC Technische Information Und Bedienungsanleitung

Safety instructions

Documentation: This documentation is exclusively valid
for the product or product range as stated in the type
designation on the cover and must be applied
comprehensively. This technical documentation must be
read carefully before installation. Follow the guidelines.
Contact the manufacturer if you have any questions or
problems. This documentation should be retained for
future reference.
User: This documentation is aimed at trained, professional
electricians with safety awareness, who are familiar with
mechanical and electrical equipment installation, accident
prevention regulations and industrial compensation laws,
and contains important information for operators and
users.
Please observe the following safety instructions which are
emphasized by special symbols.
Caution: Danger to persons due to electricity.
Attention: Danger to persons due to risks arising
from the operation of the equipment.
Danger of crushing/trapping.
Warning: Non-observance leads to destruction.
Danger to material due to incorrect handling.
Important information
Use according to regulations: The product may
only be used for the functions and applications
detailed, and in accordance with the accompanying
documentation. Unauthorised electrical and mechanical
modifications are not permitted and will invalidate
warranty and liability.
Transport and storage: The product may only be
transported and stored in its original packaging. It must
not be knocked, dropped, or exposed to moisture,
aggressive vapours or harmful environments.
More detailed transport and storage instructions provided
by the manufacturer must be observed.
Installation: Installation and assembly may only be carried
out by trained professional electricians, in accordance with
the recognised rules of engineering as well as the
technical documentation provided here. This will
guarantee that the product will function safely during
operation. Care should be taken that all mechanical
components are fixed. Immediately after installation the
electrical and mechanical components should be checked
to ensure that they function correctly, and the tests and
the results thereof should be documented.
10/13424999944
Ventilation chain motor LM AC
Operation: Safe operation is guaranteed if the
acceptable rated values and guidelines regarding
maintenance information stated in this documentation, as
well as supplementary information provided by the
manufacturer, are followed.
Malfunction: If a malfunction is identified in the course of
installation, maintenance, inspection etc., immediate
action should be taken to rectify the problem.
Repair and maintenance: Defective equipment must
only be repaired by the manufacturer, or by companies
authorised by the manufacturer. Only original spare parts
may be used. Repairs may only be carried out by trained
professional electricians, in accordance with the
recognised rules of engineering as well as the technical
documentation provided here and supplementary advice
from the manufacturer. This will guarantee that the
product will function safely during operation. Care should
be taken that all mechanical components are fixed.
Immediately after repair the electrical and mechanical
components should be checked to ensure that they
function correctly, and the tests and the results thereof
should be documented.
Maintenance: If the product is used as part of a safety
system such as a smoke and heat extraction system
(SHE), it must be tested, maintained and if necessary
repaired at least once a year as specified by the
manufacturer or in line with DIN EN 18232-2 Smoke and
heat control systems for instance. This is also
recommended for systems used purely for ventilation. If
the product is to be used in other safety systems, shorter
maintenance intervals may be necessary. With systems
composed of control units, opening devices, control-
sections etc., all components that interact directly with
each other are to be included in maintenance.
Maintenance must be carried out comprehensively follow-
ing the manufacturer guidelines and the accompanying
documentation. Components requiring maintenance must
be accessible. Defective equipment must only be repaired
by the manufacturer, or by companies authorised by the
manufacturer. Only original spare parts may be used. All
components that have a specified maximum operation
time (such as batteries) must be replaced within this time
(see technical specification) with original parts or
manufacturer-approved parts. Regular inspection is
necessary to ensure that the equipment is ready for
operation. A maintenance contract with a recognised
contractor is recommended.
15