STG-BEIKIRCH CDs Technische Information Und Bedienungsanleitung Seite 21

Disposal: Packaging is to be disposed of
appropriately. Electrical equipment is to be disposed
of at recycling collection points for scrap electrical and electronic
equipment. The Electrical and Electronic Equipment Act relating
to disposal of electrical equipment does not apply in this instance.
Rechargeable and single-use batteries are to be disposed of
in line with § 12 of the Battery Ordinance (BattV), either via the
manufacturer or at an appropriate collection point. Electrical
equipment and batteries must not be disposed of with household
waste.
Compatibility: When putting together a system consisting of
various devices made by different manufacturers, the system
compatibility must be tested and approved by the constructor to
ensure safe function during operation. Equipment modification to
achieve compatibility must be authorised by the manufacturer.
Conformity: This confirms that the equipment complies with the
recognised rules of engineering. For electrical equipment a decla-
ration of EC conformity can be requested from the manufacturer.
Note: if the equipment (e.g. drive unit) is part of a machine in
terms of the Machinery Directive 2006/42/EC, this does not ren-
der the supplier/contractor exempt from informing the customer
with regard to the necessary installation instructions, labelling,
documentation and certificates relevant to this directive.
Guarantee: The ZVEI "Green Supply Conditions" are taken as ag-
reed. The guarantee period for material supply is 12 months. Any
intervention with the equipment or system that is not authorised
by the manufacturer will result in invalidation of liability, guarantee
and service.
Liability: Product changes and settings may be modified without
advance notice. Illustrations are not binding. No liability will be
held for contents despite maximum care being taken.
Electrical safety
Wiring and electrical connections must only be done by an
electrician. Mains 230 / 400 V AC must be secured separately on
site. The appropriate laws, specifications and standards must be
observed, such as the directive relating to fire safety of conduit
installations (MLAR / LAR / RbALei), VDE 0100 (specifications for
high-voltage circuits up to 1000 V), VDE 0815 (installation cables
and wiring), VDE 0833 (fire, burglary and attack alarm systems).
If necessary, cable types must be defined in conjunction with
the local approval bodies, power supply companies or fire safety
authorities.
Cabling for extra-low voltages (e.g. 24 V DC) is to be laid sepa-
rately from low-voltage line (e.g. 230 V AC). Flexible cables must
be laid in such a way that they cannot be sheared off, twisted
or snapped during operation. Power supplies, control units and
junction boxes must be accessible for maintenance work. Cabling
types, lengths and cross-sections are to comply with technical
guidelines.
04/13424999257
Before work is carried out on the system, the
mains current and emergency power supply
(eg. rechargeable batteries) is to be disconnected from all-poles
and secured to prevent accidental switch-on. Never operate the
drive units, control units, operator elements and sensors on sup-
ply voltage and connections in such a way as to contravene the
guidelines in the operator manual. There is a risk of fatal injury,
and it can cause components to be destroyed!
Mechanical safety
Falling window casements: Window casements are to be moun-
ted in such a way that even if one of the suspension elements
fails, the design prevents the unit from falling or moving in an
uncontrolled way, e.g. by double hanging, security stay, safety
catch. Please note: to prevent obstruction/falling of the win-
dow, the security stay/safety catch must be compatible with the
intended opening span and mechanism of the window. See also
the directive for power-operated windows, doors and gates (BGR
232) and the ZVEI brochure "RWA Update No. 3, power-operated
windows".
Fittings and fixing material: any fixing materials required or sup-
plied with the product must be adapted to the building and load,
and if necessary supplemented.
Crush and shear points: Power-operated windows,
doors and gates: Any crush and shear hazard areas, for instance
between the casement and frame or skylight and base, must be
secured against trapping using appropriate measures to prevent
injury. See also the directive for power-operated windows, doors
and gates (BGR 232) and the ZVEI brochure "RWA Update No.
3, power-operated windows".
Accident prevention regulations and industrial compensati-
on laws: For works to, on or in a building or part thereof, the
appropriate accident prevention regulations (UVV) and industrial
compensation laws (BGR) are to be observed.
Environmental conditions: The product must not be knocked,
dropped, or exposed to vibration, moisture, aggressive vapours
or harmful environments, unless the manufacturer has authorised
one or more of these environmental conditions.
SHE chain drive CDs
21