Starting Up - Gram PLUS Bedienungsanweisung

Starting up
Code/parameter setting
Display -
Temperature setting
0 (2) (3) (4) (5) 1*0
Defrosting —'
Dry refrigeration—
L
B.EB.
Unfreeze
Q 0 ® @
1
Start/stop — >
Plug in the cabinet
To start, press the START/STOP key.
The figures that now appear in the display give the actual temperature in the cabinet
and indicate that power is connected.
If the cabinet does not start immediately, and < S > lights, it is because defrosting is
taking place.
To cancel the start-up defrosting, press keys ^—-' —^ ^—' for more than 6
seconds.
is turned off.
NB! Always push V _ / first, otherwise the controller reads the pushing of the key as
the lock code.
Push v l y , a beep sounds, and you can continue.
NOTE:
Servicing
Make sure the appliance is switched off at the socket before service is performed
on electrical parts. It is not sufficient to switch off the cabinet by the START/STOP
key as there will still be voltage to some electrical parts of the cabinet.
76-504-0930
15