Alarm; Sleep Timer - Omnitronic DJP-900NET Bedienungsanleitung

Alarm

The device offers two alarm times which you can set and use separately. The setting procedure for the two
alarms is the same.
• Navigate to the main menu and select Alarm or press the Alarm button (clock symbol) on your remote
control
• Select Alarm 1 or Alarm 2 and then Turn on to activate the alarm.
• You can now adjust the following settings:
Display
Time
Sound/Tone
Repeat
Volume
After you are finished, exit the menu with the button ◄
clock symbol appears in the upper left corner of the display.

Sleep timer

When you activate the Sleep Timer, your receiver switches to standby mode after a certain period of time
(adjustable between 15 and 180 minutes).
Press the button on the remote control to set the time for Sleep Timer. An icon appears on the display
after the time has been set.
Function
To adjust the time the alarm is to go off
You can choose to be woken up by an alarm tone, FM station, DAB station or a
station from your Favourites (Note – Only previously played stations can be used as
alarm tone. You also need to add radio stations to your Favourites before you select
the alarm option My Favourites.) The alarm is switched off by pressing
TUNE/SELECT or OK.
To select the frequency of the set alarm: Once, daily or particular days of the week
To adjust the sound volume of the alarm tone using the rotary control TUNE/SELECT
on the unit or the buttons ▲ und ▼ on the remote control
When the alarm has been successfully activated, a
.
35 • EN