Operating Elements And Connections; Front Panel; Rear Panel - Omnitronic DJP-900NET Bedienungsanleitung

4 Operating Elements and Connections

Front panel

No. Element
1 POWER switch
2 AUX input
3 INPUT select switch
4 LEVEL control
5 LOW & HIGH sound controls
6 MIC LEVEL control
7 MIC IN input
8 IR sensor
9 Display
10 Navigation buttons
11 TUNE/SELECT control

Rear panel

12 LAN jack
13 Digital outputs (optical)
14 WiFi antenna jack
15 Radio antenna jack
16 INPUTS LINE 1-4 jacks
17 OUTPUT jack
18 MODE switch
19 OUTPUTS terminals
20 Power input
21 Fan
Function
Turns the unit on and off
3.5 mm jack to connect audio devices with line level; when this jack is
connected, the radio will be muted
To select the signal source (LINE 1/2/3/4 or AUX/RADIO)
Adjusts the overall volume
Adjust the high and low frequencies for the output signal
Adjusts the microphone volume
Connector for microphone (combination XLR/6.3 mm jack)
Sensor for remote control
2.4'' TFT display
MENU sets operation mode, BACK/FORWARD selects menu items and
settings
Rotation: scroll through menu items, adjust volume
Actuation: confirm settings
10/100 Mbit/s (RJ-45)
Toslink and coaxial connector to connect audio devices (e.g. amplifiers)
For supplied WiFi antenna
For supplied cord antenna for DAB/FM reception
Stereo XLR and RCA inputs for audio units with live level (e.g. CD player,
tuner)
Stereo XLR and RCA outputs for connection to units with line level inputs
(e.g. mixer or additional amplifier)
• STR: stereo operation with two speakers
• BRGD: bridge operation with doubled output power with one speaker
• + (red) and ‒ (black): for connecting speakers in stereo mode
• R (red) and L (red): for connecting a speaker in bridge mode or 100V mode
Used to plug in the supplied power cable
To prevent overheating: do not cover!
27 • EN