Herunterladen Inhalt Inhalt Diese Seite drucken

Operation Mode Bluetooth; Alarm - Omnitronic DJP-900NET Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DJP-900NET:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7.9 Operation mode Bluetooth

The Internet radio features a Bluetooth receiver allowing you to stream music wirelessly from your mobile
devices such as smartphones, tablets and notebooks. The devices require initial pairing. The Internet radio
stores the pairing information and will attempt to reconnect with previously paired devices when Bluetooth
playback mode is selected.
1) Select "Bluetooth" in the main menu or press the MODE button repeatedly. The Internet radio switches
to pairing mode and scans for Bluetooth devices in the reception range.
Bluetooth ON
a
2) Activate the Bluetooth function at the Bluetooth source. The Internet radio is indicated by "DJP-900NET"
on the display of the Bluetooth source. Pair the devices with each other.
3) Now play music at the Bluetooth source as you normally would. Playback is now via your Internet radio
and can be controlled with the ►II,

7.10 Alarm

The device can switch on at a specified time. Two different alarm times can be set for this purpose. The
setting procedure is identical for both alarm times.
(1) Select "Alarm" in the main menu or press the
(2) From the alarm clock menu, select and turn on the desired alarm.
(3) Now set the alarm time, the alarm tone, the alarm days, the alarm volume and the alarm duration.
▪ When waking up with radio sound, you must select a station from your saved favorites or the station lists
of DAB or FM radio.
▪ The volume is adjusted with the rotary knob or the arrow buttons ▲ and ▼ on the remote control.
(4) The alarm is now active and set up. You can now exit the menu with the BACK ◄ button or the
corresponding arrow button on the remote control.
(5)
A clock symbol appears in the upper left corner of the display when the alarm function is activated.
Switching off the alarm
(1) When the alarm sounds, you can turn it off by pressing the
(2) To completely deactivate the alarm again, navigate to the alarm clock menu and switch off the activated
alarm. The existing settings of the alarm clock are still retained.
DJP-900NET
b
and
buttons on the remote control.
button on the remote control.
45 • EN
button.
c

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis