Sanus VLF220 Montageanleitung Seite 6

1-2
Attach brackets to a TV with a flat back
1-2
Attach brackets to a TV with an irregular back
1
[01]
[10, 11]
[12]
400 x 400mm
6
In step 1, If you selected the:
M4 x 12mm screw [04] use the M4 washer [14].
M6 x14mm screw [06] use the M6/M8 washer [15].
M8 x16mm diameter screw [08] use the M6/M8 washer [15].
Confirm that the brackets are level on the back of the TV.
For 400 x 400mm hole spacing: Resecure the locking carriages (c) and insert the
support tubes.
If you require additional space for cables, recesses, or protrusions, choose one of the
configurations below.
400 x 400mm
1.
2
2.
If your TV has a curved or obstructed back, or if you need more room to accomodate
[01]
cables, recesses, or protrusions, use either the 14mm, or 24mm spacer [10 or 11].
[10, 11]
[12]
In step 1, If you selected the:
M4 x 30mm screw [05] use the M4 washer [14] and spacer [10].
M6 x 40mm screw [07], use the M6/M8 washer [15] and spacer [11].
M8 x 45mm screw [09], use the M6/M8 washer [15] and spacer [11].
Confirm that the brackets are level on the back of the TV.
For 400 x 400mm hole spacing: Resecure the locking carriages (c) and insert the support
tubes.
Standard configurations are shown. For special applications, or if you are uncertain about your
hardware selection, contact Customer Service.
M4
[10]
Push the shoulder washer [12] through the appropriate openings of the brackets
[01].
Snap shoulder washer [12] into the spacer you selected in step 1-2.
[12]
[05]
[14]
M4/M6/M8
M6/M8
[11]
[01]
[14, 15]
[04, 06, 08]
[12]
[15]
[07, 09]
(6901-002111 <02>)