Troubleshooting And Maintenance - Sanus VLF220 Montageanleitung

6
Adjustments
1
(A)
[03]
6-1
A
[03]

Troubleshooting and Maintenance

To remove the TV: (See illustrations in step 4.)
Unscrew the locking screw [13].
1.
Push and hold the locking tab (L).
2.
3. Carefully lift the TV from the arm [03], then release the locking tab (L).
TV will not hold the downward tilt position and floats upward:
1. Adjust tilt tension setting (see step 6).
2. If the problem persists, use a bracket installation option that uses longer spacers (see step 1-2).
TV will not hold the home position and floats downward:
1. Adjust tilt tension setting (see step 6).
2. If the problem persists, use a bracket installation option that uses shorter spacers (see step 1-2).
(6901-002111 <02>)
2
002913.eps
MF220 - side view
B
[23]
1. Adjust left / right swivel tension.
CAUTION:
Be sure threads are visible above the nut.
2. Adjust arm extend / retract tension.
3. Adjust up / down tilt tension.
2
Adjust level.
A. Loosen screws
B. Adjust level
C. Re-tighten screws
002953.eps
LF220 - Adjust monitor level
Never remove the tension nut (A).
[24]
3
C
[03]
[23]
11