Description Of The Device; Initial Start-Up - Kärcher NT 55/2 Tact2 Me I Bedienungsanleitung

Description of the device

Illustration A
Electrodes
1
Suction hose
2
Push handle
3
Suction head lock
4
Spacer
5
Chassis
6
Dirt receptacle
7
Suction head
8
Dirt receptacle steering roller
9
Chassis steering roller with parking brake
10
Floor nozzle
11
Suction pipe
12
Set down mechanism bracket
13
Dirt receptacle handle
14
Suction hose port
15
Turn switch
16
Carrying handle
17
Filter cover
18
Hose and cable hooks
19
Angle piece
20
Electrode extension
21
Floor nozzle holder
22
Holder for crevice nozzle
23
Suction pipe holder
24
Type plate
25
Flat fold filter
26
Mains cable
27
Filter dedusting
28
Colour coding
 Control elements for the cleaning process are yel-
low.
 Control elements for maintenance and servicing are
light grey.
Preparation
1. Unpack the device and install the accessories.
Illustration B
Initial startup
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the flat fold filter when vacuuming.
Anti-static system
Static charges are discharged through the earthed con-
nection nozzles. This prevents sparking and electric
shocks with electrically conducting accessories (includ-
ed in the scope of delivery).
 A dust bag (special accessories) can be used when
vacuuming fine dust.
Installing the dust bag
WARNING
Risk of injury from the lifting mechanism
Crushed hands.
Under no circumstances should you hold your hands
between the dirt receptacle and spacer or allow them to
come close to the lifting mechanism while locking it.
Lock the container with both hands by actuating the set
down mechanism bracket.
1. Lock the parking brakes.
2. Pull the set down mechanism bracket upwards. The
container is unlocked and lowered.
Illustration C
3. Pull out the container by the handle.
Illustration D
4. Insert the dust bag (special accessories) so that it
fits tightly against the container wall and the contain-
er floor.
Illustration E
5. Pull the dust bag (special accessories) over the con-
tainer. Make sure that the dust bag (special acces-
sories) is not slipped over the hangers on the
container.
6. Replace the container and lock with the set down
mechanism bracket.
Wet vacuum cleaning
Note
The flat fold filter (cellulose) with the order number
6.907-276.0 included in the scope of delivery is not rec-
ommended for regular wet vacuum cleaning.
Installing the squeegees
1. Remove the brush strip.
Illustration F
2. Install the squeegees.
Removing the dust bag
 The dust bag (special accessories) must always be
removed when vacuuming wet substances.
WARNING
Risk of injury from the lifting mechanism
Crushed hands.
Under no circumstances should you hold your hands
between the dirt receptacle and spacer or allow them to
come close to the lifting mechanism while locking it.
Lock the container with both hands by actuating the set
down mechanism bracket.
1. Lock the parking brakes.
2. Pull the set down mechanism bracket upwards. The
container is unlocked and lowered.
Illustration C
3. Pull out the container by the handle.
Illustration D
4. Fold up the dust bag (special accessories).
Illustration G
English
Dry vacuuming
11