Agilent Technologies TV 401 Bedienungshandbuch Seite 222

17 Technical Information
J5 - In-Out
The PROGRAMMABLE SET POINT signal has the following default
settings:
RELAY CONTACT: this output signal is the repetition of the
"PROGRAMMABLE SET POINT" output signal. When the
"PROGRAMMABLE SET POINT" signal is at low level, the relay is
excited and it closes the contact between pin 10 and pin 12.
The Navigator Software (optional) allows the operator to set all the
NOTE
programmable feature.
222/264
reference quantity: frequency
threshold: 980 Hz
hysteresis: 2 %
activation type: low level
delay time: 0 second
TV 401/301 MS User Manual / 87-901-013-01 (A)