Inhaltsverzeichnis
Werbung
Transport in motor vehicles
This product is dynamically tested according to ISO 7176-19.
Warnings -
The following instructions must be followed to maintain the safety
The approval is not valid on 'custom made' chairs
This product is approved for transporting the user in motor vehicles. Please look at
MEASUREMENTS in the back of this manual for the max load. indication
The user should transfer to the vehicle seat and use the vehicle-installed restraint
system whenever possible
The product must be placed in a forward-facing position, when used as a seat in
a motor vehicle. Use an approved 4-point strap-type tiedown system acoording to
ISO 10542-2
Use an approved 3-point belt according to ISO 10542-1 in the wheelchair. Restraints
should not be held away from the body by wheelchair components such as armrests
or wheels. It is not enough ONLY to use a hipbelt
All accessories must be removed from the wheelchair and secured separately in the
vehicle. Accessories which can not be removed, must be secured to the wheelchair
but positioned away from the user with energy-absorbing padding placed between
the accessories and the user
The product should be inspected by the dealer before reuse followng involvment in
any type of vehicle collision
The instructions on how to prepare the seat and chair, must be carried through
before transportation
www.support.R82.com
ENGLISH
Restraints
should not be
held away from
body by wheel-
chair compo-
nents such as
armrests or
wheels
27
EN
Werbung
Inhaltsverzeichnis
