Inhaltsverzeichnis
Werbung
Safety -
Signs, symbols and instructions placed on this product must never be covered or removed and must re-
main present and clearly legible throughout the entire lifetime of the product. Immediately replace or
repair illegible or damaged signs, symbols and instructions. Contact your local dealer for instructions.
Caregiver
Read all of the instructions carefully before use and keep them for future reference. Incor-
rect use of this product may cause serious injury to the user
Always use the correct lifting techniques and aids for this purpose
Never leave the user unattended in this product. Ensure permanent supervision by an adult
Always use the product in a moderate pace. Do not run with the product
Repair/replacements must only be made using new original R82 spare parts and fittings and
carried out in accordance with the guidelines and service intervals prescribed by the supplier
If there is any doubt as to the continued safe use of your R82 product or if any parts should
fail, stop using the product immediately and contact your local dealer as soon as possible
Environment
For the purpose of safety and comfort, always move the product away from the sun and
allow to cool before use
Use this product on a level surface without any obstacles. Be aware of reduced maneuver-
ability on slippery roads
When using on inclines, please refer to measurements
User
If the user is close to the max. load limit and/or has a lot of involuntary movements, e.g.
rocking, a larger size with a higher max. load or a different R82 product should be considered
Product
To achieve the required static stability the Multi Frame:x with the Panda Future 5 seat must
be set in the most forwards position. In other positions the static stability is not sufficient.
When setting the Multi Frame:x with other seats or changing position, please ensure that
the seat and wheels are in a stable position.
Carry out all positional adjustments on the product and accessories and ensure that all
knobs, screws and buckles are securely fastened before use. Keep all tools out of the reach
of children
Activate the brakes before placing the user into the product
Activate the anti-tips when the product is being used on inclines
Activate the anti-tips before angling the seat and back
Please take extra care not to catch your fingers or skin when adjusting moving parts on this
product
Ensure the stability of the product is maintained before placing the user in it
We recommend you notify the user before angling the seat and back
Angle the seat base if the front wheels collide with the footplates
Ensure the castors are fully-functional and secure before use
Inspect the product and all of its accessories and replace any worn out parts before use
Do not expose the gas spring to pressure or high temperatures. DO NOT puncture
Do not expose the piston rod to scratches etc. It is important to use a cloth or the like, if
tools are used to adjust the gas spring
The user must not occupy the product while it is being transported into or out of a vehicle
by a lift
www.support.R82.com
ENGLISH
25
EN
Werbung
Inhaltsverzeichnis
