Charging The Battery - Getac Z710 Handbuch

Getting Your Device Ready for Use
Installing the SIM Card
(Select Models Only)
1.
Remove the screw from the SIM card
cover and flip open the cover.
2.
With the SIM card's chip side facing the
back of the device and the beveled
corner pointing to the slot, insert the
card all the way into the slot.
3. Close the cover and tighten the screw.
2

Charging the Battery

Connect the AC adapter to charge the
battery.
The charge indicator glows in amber
when charging is in progress. When the
battery is fully charged, the amber
indicator turns into green.
Fully charge the battery before using your
device for the first time.
CAUTION: As a battery protection, store
the device where the temperature is
appropriate. Avoid high temperatures.
Performing the Initial
Startup
1.
Press the power button to turn on your
device.
2.
Select Models Only: If a SIM card has
been inserted and the mobile phone
network operator (or you) has set the
PIN, you will be prompted to enter the
PIN. Tap OK after entering the PIN.
3.
Follow the on-screen instructions to
complete the initial setup process.
4.
After the setup is completed, the Home
screen appears. You can now use your
device.