Main Functions - air&me ROHAN Bedienungsanleitung

MAIN FUNCTIONS

[ TIMER ] BUTTON
A
• By pressing this button several times, you can select the operating time from 1 to 24 hours.
A long press of the button allows you to quickly scroll through the numbers on the screen.
• Once the operating time is set, you can release the button: the digital display indicates
the ambient humidity rate, the luminous indicator of the [ Timer ] button lights and the
dehumidifier turns on. It automatically stops at the end of the preset time.
• To deactivate this function, press the button twice in a row when the digital display
indicates the ambient humidity rate.
[ INSIDE DRYING OF THE APPLIANCE ] BUTTON
B
• By pressing this button, you can start the procedure for the inside drying of the dehumidifier:
the luminous indicator lights and the digital display indicates [ CL ]. This process of drying
is very useful before long time storage because it prevents the formation of mould inside
the appliance.
• The process takes about 1 hour:
– The dehumidifier starts in high air speed (HIGH) and releases air continuously for 30
minutes.
– Then, the dehumidifier works in a lower air speed (LOW) for 20 minutes.
– Finally, the appliance comes back in "standby" mode.
• To deactivate this function, press the button again: the luminous indicator turns off.
[ SPEED ] BUTTON
D
By pressing this button several times when AUTO or CONTINUOUS modes are selected, you
can adjust the air flow produced by the appliance selecting between one of the two
modes: LOW (low air flow) or HIGH (strong air flow).
[ HUMIDITY RATE ] BUTTON
G
• By pressing this button several times, you can define the humidity rate of the air that you
want to reach between 30 and 80% (the adjustment is made in 5% steps).
• When the ambient air humidity is lower than the preset humidity rate, the appliance
stops working. When the ambient air humidity is higher than the preset humidity rate, the
appliance automatically restarts.
Be careful, this function is only available in AUTO mode.
[ MODE ] BUTTON
I
This button enables you to choose between two operating modes:
• AUTO Mode: If the humidity rate in the air is higher than the preset rate, the compressor
starts and the fan runs at the preset speed. If the humidity rate in the air is lower than the
preset rate, the compressor and the fan stop.
• CONTINUOUS Mode: Regardless of the humidity rate in the room, the compressor starts
and the fan runs at the preset speed.
Be careful, the build-in hygrostat in the appliance has a margin of error of ± 5%.
21