Digital-Display; Main Functions - air&me LARY Bedienungsanleitung

INSTRUCTIONS DE FONCTIONNEMENT
Make sure that the product is placed on a dry flat surface. Leave at least 20cm behind, around
and in front of the appliance. Make sure that the pre-filter and the tank are correctly placed.
1. Plug the appliance.
2. Press the ON/OFF button:
• The digital display will flicker during the stabilisation time and then, it will display the humidity
rate of the room air.
• Lary automatically starts in HYGROSMART
3. Press ON/OFF twice to select "CLOTHES DRYER" MODE.
4. Press ON/OFF a third time to select NIGHT MODE.
5. Press ON/OFF for a long time to turn the appliance off. The fan will stop after 30 seconds.
DIGITAL DISPLAY
D
F
A B

MAIN FUNCTIONS

HYGROSMART
A
humidity rate in the air (between 47% and 53%).
"CLOTHES DRYER" MODE: In "clothes dryer" mode, the appliance works at maximum speed
B
until the air humidity is equal to 20%. It is the perfect mode for laundry drying which needs
significant air dehumidification.
"NIGHT" MODE: Identical to the Hygrosmart
C
the humidity rate of your room between 47% and 53%. However, the appliance works more
quietly, at low speed, and it does not produce sound signal once the tank is full.
NEGATIVE IONISATION FUNCTION: This function automatically starts when you turn the appliance
D
on. It enables to clean the air and eliminate bad smells, thanks to the diffusion of negative ions.
10
E
C
FUNCTION: This mode enables you to maintain, at maximum speed, an ideal
®
FUNCTION.
®
Hygrosmart Function
®
A
Clothes dryer mode
B
Night mode
C
Negative ionisation function
D
"Full tank" alert
E
Display of the humidity rate of room air:
F
• Between 40 and 60%, the display is green to indicate an ideal
humidity rate.
• Below 40%, the display is blue to indicate a too dry air.
• Above 60%, the display is red to indicate a too humid air.
function, this mode enables you to maintain
®