Selecting The On-Screen Menu Language (Lang); Selecting The Input Signal; Automatically Sizing And Centering The Picture (Auto) - Sony GDM-FW9011 Bedienungsanleitung

Selecting the on-screen menu
language (LANG)
English, French, German, Spanish, Italian, Dutch, Swedish,
Russian and Japanese versions of the on-screen menus are
available. The default setting is English.
1
Press the joystick.
See page 10 for more information on using the joystick.
b
2
Move the joystick to highlight
the joystick again.
b
3
Move the joystick up or down to select a language
and press the joystick again.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
• : Russian
• : Japanese
To close the menu
Press the joystick once to return to the main menu, and twice to return to
normal viewing. If no buttons are pressed, the menu closes automatically
after about 30 seconds.
To reset to English
Press the RESET button while the LANGUAGE menu is displayed on the
screen.
8
MENU OK
MENU
SCREEN CENTER CONV
GEOM EXIT COLOR
LANG SIZE OPTION
LANG and press
L ANGUAGE
ENGL I SH
FRANÇA I S
DEUT SCH
b
ESPAÑOL
I T A L I ANO
NEDER L ANDS
SVENSKA

Selecting the input signal

You can connect two computers to this monitor using the video
input 1 (HD15) and video input 2 (BNC) connectors. To switch
between the two computers, use the
Move the INPUT switch.
The currently selected connector ("INPUT 1" : HD15 or
"INPUT 2" : BNC) appears on the screen for a few seconds.
INPUT
Note
If no signal is input to the selected connector, NO INPUT SIGNAL
appears on the screen. After a few seconds, the monitor enters the power
saving mode. If this happens, switch to the other connector.
Automatically sizing and centering
the picture (AUTO)
You can easily adjust the picture to fill the screen by pressing the
ASC (auto sizing and centering) button.
Press the ASC button.
The picture automatically fills the screen.
ASC
Notes
• This function is intended for use with a computer that provides a full-
screen picture. It may not work properly if the background color is dark
or if the input picture does not fill the screen to the edges.
• The picture will fill the screen to the edges only if the aspect ratio of the
picture is 16:10 and the signal is listed on the preset mode timing table
in Appendix. Pictures with an aspect ratio other than 16:10 are
displayed at their actual resolution and do not fill the screen to the
edges.
• The displayed image moves for a few seconds while this function is
performed. This is not a malfunction.
switch.
INPUT
1 2