Cleaning And Maintenance; Technical Data - ECG FS 40 R Bedienungsanleitung

SLEEP – the motor works the first half hour in the NATURAL mode at maximum rotations, the next
•
half hour in the NATURAL mode at medium rotations and then it switches into the NATURAL mode at
minimum rotations and remains so until switched off.
Natural – high speed
High
Medium
Low
• Horizontal oscillation (left - right): it is controlled by the "SWING" button on the remote controller or on
the control panel. The proper indicator lights up on the panel. If you want the movement stopped, press
the button again. The indicator "SWING" switches off.
• Vertical tilt (up/down): To set it, grasp the head of the motor and tilt it in the desired direction. You will
hear a click indicating the locking of the head in the chosen position.
Timer: This feature allows you to set the time after which the fan is automatically turned off. Set the timer
•
by repeatedly pressing the button TIMER on the remote control or on the panel of the device. Each time
you press the button, you extend the set time from half an hour to a maximum of 7.5 hours. The LEDs on
the panel show the set time (0,5h, 1h, 2 h, 4 h).
The time is given as a sum of LEDs (for example if the timer is set for 5,5 hour the LEDs show 0,5h+1h+4h).
• If you want to deactivate the timer, set the maximum time and press TIMER once again (all LEDs turn
off ).
• To turn off the fan, press on the remote control or panel of the device the OFF button. Then unplug the
power cable from the socket.
When you are not using the device, always unplug the power cord from the electrical outlet.

CLEANING AND MAINTENANCE

Before cleaning pull out the plug of the power cord from the outlet!
•
• Use soft, dry cloth for cleaning. Do not use solvent, thinners or other aggressive solvent containing
cleaners.
• Make sure that no liquid enters the device.
• Protect the appliance from water and high humidity!
• Do not immerse the fan into water!
• If the fan is not used for long time, it is necessary to protect it from dust and moisture. We recommend that
you store it in its original packaging.
• In the event of a malfunction or an unusual odor, unplug the appliance from the power supply and have it
checked by an authorized service center.
• You can use vacuum cleaner with a dust nozzle to clean the grilles.
• Check it once a week and using a vacuum cleaner clean the back grill of the fan.
We recommend to keep the packaging for possible transportation or storage of the fan.

TECHNICAL DATA

Nominal voltage:
Nominal input power:
Noise level:
Fan diameter:
Remote control:
Natural – medium speed
Natural – low speed
0.5 hours 1 hour
220–240 V~ 50 Hz
50 W
64.3 dB
40 cm
2× AAA batteries (not included)
Time
GB
37