Bkm-229X Analog Component Input Adaptor; Function; Using The Input Connectors - Sony BKM-227W Bedienungsanleitung

BKM-229X Analog
Component Input
Adaptor
The BKM-229X Analog Component Input
Adaptor is a video signal input adaptor for
Sony professional monitors.
When installed in an input option slot on the
main unit, it provides video input connectors
for the main unit and a decoder for analog
component signals.

Function

Decoder for analog component
signals
The BKM-229X is equipped with a built-in
decoder for analog component signals.
6
GB

BKM-229X Analog Component Input Adaptor

Using the Input Connectors

For information about installing the BKM-
229X in an input option slot on the main unit,
see the operating instructions for the main
unit.
Configuration of Input Connectors
and Signals that may be Input
The configuration of the input connectors,
and the signals that may be input are shown
below.
1 2
G/Y B/P
B
ANALOG
1 G/Y connector (BNC)
Input connector for component Y
(luminance) and G of RGB signals.
2 B/P connector (BNC)
B
Input connector for P
difference) of component signals and B
of RGB signals.
3 R/P connector (BNC)
R
Input connector for P
difference) of component signals and R
of RGB signals.
4 EXT SYNC (external sync)
connector (BNC)
When this unit operates on an external
sync signal, connect the reference signal
from a sync generator to this connector.
See the operating instructions for the
main unit to use the external sync signal.
3 4
R/P EXT SYNC
R
229X
(blue color
B
(red color
R