Charger Features - Stryker SMRT 6500 Bedienungs- Und Wartungshandbuch

SMRT Charger
Indicator LEDs
• Power connection - Use this outlet to connect or disconnect the SMRT
Charger from the appropriate power source as shown in Figure 6 on
page 1-20.
• SMRT Charger power LED - The green power LED provides charger status
information. If the LED is illuminated, then the SMRT Charger has power.
• SMRT Charger indicator LEDs - The green and amber charger indicator
LEDs provide SMRT Pak status information. The LEDs may be in a steady
or flashing state based on the condition of the SMRT Charger or SMRT Pak.
SMRT Charger Indicator LED Status
GREEN (flashing)
GREEN (solid)
AMBER (flashing)
AMBER (solid)
www.stryker.com

Charger Features

Figure 5: Charger Features
SMRT Charger is charging the SMRT
Pak. The optimum charge time is two
hours.
SMRT Pak is fully charged and ready for
use.
SMRT Pak temperature delay. The SMRT
Charger is waiting for the SMRT Pak to
reach an allowable temperature range of
43°F to 88°F (6°C to 31°C).
SMRT Pak error. See
additional troubleshooting information.
6500-109-105 REV A
SMRT Charger
Power LED
page 1-28
Return To Table of Contents
1-19
English
for