Charger Installation; Installing The Smrt Charger; Electrical Power Installation Requirements - Stryker SMRT 6500 Bedienungs- Und Wartungshandbuch

INSTALLING THE SMRT CHARGER

When installing the SMRT Charger:
• Locate the SMRT Charger in an environmentally controlled location that is
free of excessive dust and moisture.
• Locate the SMRT Charger in an area that is kept within a constant
temperature range. An allowable temperature range is 43°F to 88°F (6°C to
31°C). The optimal temperature range is 65°F to 75°F (18°C to 24°C).
• Position the SMRT Charger where it can be readily accessed for use.
• Locate and maintain the power supply and power cords to minimize the risk
of damage and inadvertent disconnections.
WARNING
To comply with established ambulance crash test standards, mount the SMRT
Charger to the optional mounting bracket in an enclosed cabinet and out of
patient reach during transport.
To mount the SMRT Charger to a horizontal or vertical surface, follow the steps
on page 1-16 to install the optional mounting bracket.

ELECTRICAL POWER INSTALLATION REQUIREMENTS

When configuring the electrical power source for SMRT Charger installation,
reference the following electrical power requirements to ensure reliable and
effective operation.
Power Operational
Type Voltage Range
AC 100-240 VAC
DC 12.5-16 VDC
www.stryker.com

Charger Installation

Frequency Maximum
Current
Draw
50/60 Hz 1.20 A
N/A 4.16 A
6500-109-105 REV A
Standby Low
Current Voltage
Draw Shut Off
0.05 A N/A
0.20 A 10 VDC
Return To Table of Contents
English
1-15