Front Pto; Lift - GOLDONI STAR Serie Bedienung Und Instandhaltung

Profile: 1"3/8 ASAE 6-splines
Select (lever n.9 fig.1)
540
750
1000
Turning direction: clockwise
Indicator light n.4 fig.3 (n.6 fig.30) signals PTO clutch disengagement. Hold
in this position only for the time required.

4.7.1 Front PTO.

(Optional)
The front PTO is engaged with knob n.10 fig.2 (fig.29):
• Set the engine between 1200 and 1800 Rpm.
• Push knob n.1 fig.29 down and turn it to "ON". Indicator light n. 14 fig.3 - n.12
fig.2 will begin to flash and then stay on
Press knob n.1 fig.29 to disengage the PTO.
Spline: 1" 3/8 ASAE with six splines
Speed: 1000 Rpm with the engine at 2350 Rpm
Turning direction: counter-clockwise.

4.8 LIFT

The following operating conditions can be applied:
Controlled position
Controlled draught
Floating mode
Combined mode
Controlled position
Ideal for jobs that required constant implement position (drills, scraper, hitched
manure spreader, etc.).
• Move lever n.14 fig.1 all the way back.
• Use
lever
Lift raising is proportionate to lever movement.
PTO SPEED
PTO Rpm
n.15 fig.1, to
540
750
540
1000
raise and
73
Engine Rpm
2160
2250
1620
2214
lower the lift.