Chapter 2. Shaver System Functions
2.1. Tornado system indicators
1
T he shaver handpiece can be used
in combination with the pump
system or independently.
1
Blade locking ring: holds blade
in place.
2
Suction toggle: controls suction
through the suction port. It should
be completely open with the
fms duo
®
+.
Suction port: the suction tubing is
connected to the suction port.
Serial number.
Blade aligning slots: allows you to
insert the blade face up or down.
Handpiece
2
6
7 8
Warning: Prior to use, the system
components should be checked for
any damage. Do not use if any
damage is apparent.
6
Connector sleeve: Pull on sleeve
to remove the cable from the
control unit.
Connector alignment dot: Matches
7
with the dot on the control unit
to indicate proper connector
alignment.
Protective cap: remove the
8
protective cap by holding the
connector sleeve and pulling it back
towards the cord. Place the cap over
the connector end of the handpiece
before soaking.
10