Sony PCS-UC500 Bedienungsanleitung Seite 19

When using PCS-5000
Click on the [Personal] tab, then
type "PCS-5000" in the column of
[First Name].
When using PCS-5000P
Click on the [Personal] tab, then
type "PCS-5000P" in the column
of [First Name].
When using PCS-4100
Click on the [Personal] tab, then
type "PCS-4100" in the column of
[First Name].
When using PCS-4100P
Click on the [Personal] tab, then
type "PCS-4100P" in the column
of [First Name].
When using PCS-4000
Click on the [Personal] tab, then
type "PCS-4000" in the column of
[First Name].
When using PCS-4000P
Click on the [Personal] tab, then
type "PCS-4000P" in the column
of [First Name].
6
Click on the [Modem] tab.
The [Modem] dialog box appears.
7
Type "NULL" in the column of
[Data Line 1: Number].
8
Click on [OK].
9
Click on [Close].
10
Select [Communication Setup]
from the [Conference] menu.
The following screen appears.
11
Click on the [Use Modem]
check box, then, on the [Setup]
button.
The [Setup] dialog box appears.
12
Set up the bit rate.
• Set the bit rate to 9600 or
38400 according to your T. 120
rate.
• Check that [Stop Bits] is set to
[One] and [Parity] is set to
[None].
13
Set [Flow Control] to
[Hardware] in [Advanced
Option].
14
Click on [OK].
15
Click on [Close].
The setting is complete, and the
original screen appears.
19