Herunterladen Diese Seite drucken

Grundig TK 146 Bedienungsanleitung Seite 22

Werbung

Telefonaufnahme
Der Anschluß des Telefonadapters
Während der Aufnahme darf kein anderes Kabel (Mikrofon oder Radio)
angeschlossen sein. Der Aufnahmewählschalter ist auf AUTOMATie zu
stellen.
Entsprechend der Vorschrjft der Deutschen Bundespost ist in diesem
Falle ein Mithören über Lautsprecher nicht möglich. Zum Abhören der
Telefonaufnahme ist der Stecker des Adapters zu ziehen.
Aufnahme ohne Automatik
Für besondere Fälle (z. B. Einblenden bei Aufnahmen mit dem Mischpult)
ist es möglich
die Automatik auszuschalten und die Pegeleinstellung von
.
Hand vorzunehmen.
Dazu verfahren Sie wie folgt:
Sie drehen den Aufnahmewählschalter auf MANUELL und drucken die
Aufnahmetaste, bis Sie den Betriebsartenschalter auf PAUSE geschaltet
haben.
Genau wie bei der automatischen Aussteuerung folgt nun eine kurze
Probe. Wenn Sie dabei den Pegelregler in Richtung
Sie, daß sich der Zeiger des Kontrollinstrumentes im Takt der Musik
oder der Sprache bewegt. Die richtige Stellung des Pegelreglers ist
erreicht, wenn der Zeiger des Kontrollinstrumentes bei den lautesten
Stellen der Darbietung auf die Marke 70 weist. (Man sagt dann: Die Auf-
nahme ist voll ausgesteuert.)
Sobald Sie den Betriebsartenschalter auf START weiterschalten, läuft
das Band an und nimmt die Darbietung auf.
22
244
S erfolgt an die Buchse
9
schieben, bemerken
.
Telephone Recordlngs
The telephone adaptor type
2
f""'io .
disconnect all other leads (microphone or radio) and you must set the
reeording seleetor to AUTOMATie. The pasta I author ities of the German
Federal Republic specify that in such a ca se you must not be able to
listen in through the built-in loudspeaker.
For playing back the telephone adaptor must be diseonneeted.
Manual Recording Level Adjustment
For special cases you may wish to disconnect the automatie recording
level facility of the machine. For example, to fade a reeording by a mixer
unit. To do this you proceed as folIows:
After seleeting the correet track, turn the reeording seleetor to MANUAL
and press the recording button whllst turning the selector switeh to
PAUSE. Just as for an automatie reeordlng. there should be a brief test
recording. Turn the recording level control towards its number
will note that the pointer of the reeording level meter fluctuates in
sympathy with the speech or musle. The correct position of the recording
level eontrol is found when the pointer of the reeording level meter
reaches its mark 70 during the loudest passages of the speech or music.
We say the recording is fully modulated. Now turn the selector switch
to START. The tape starts to move and you are recording.
244
S is connected to Socket
2.
You must
9
and you

Werbung

loading