General Installation Guidelines - Tecsis F3301 Originalbetriebsanleitung

Betriebsanleitung/Operating manual
F3301/F33C1/F33S1
S#
UB+/S+
0V/S-
UR+, UR- Pin assignment – power supply Relay
S-Test
6.2

General installation guidelines

• The loads acting upon the load cell must be in the load direction.
• Tension and/or compression force is introduced via threaded, the
load cell is supported to the point Vorderkante Montageplatte.
2kN to 20kN
www.tecsis.de
Signal
Power supply
Product no.
Pin assignment – power supply / signal +
Pin assignment – power supply - / signal -
SIL-Shift
Fig. 4 mounting, shere beam up to 20 kN
BD_BE_973 b 29