PeakTech 1031 Bedienungsanleitung Seite 15

2. Introduction
The new voltage tester P 1031 is used for the contactless detection
of AC voltages on live cables and devices. By switching the
measuring range, it is possible to detect even low voltages down to
a minimum of 50V AC with the P 1031.
With its "Working" display, it quickly becomes apparent that the
voltage tester is switched on and can carry out the respective
measurement.
If AC voltage is present at the relevant measuring point, this is
indicated visually by a flashing red LED and the integrated buzzer
sounds. In addition, a vibration motor ensures the detection of
detected voltages even in noisy and confusing work environments.
The integrated LED flashlight can be switched on at any time, even
if the actual voltage tester is switched off. In addition, the device
can be transported conveniently and safely with the pocket clip.
The ergonomic and modern design, as well as the many practical
features and the high user safety with overvoltage category IV 1000
V complete the profile of the PeakTech 1031 voltage tester.
*
Modern non-contact voltage tester
*
Operating indicator "Working"
*
Switchable flashlight
*
Pocket clip for easy storage of the voltage tester
*
Different LED lighting of the probe for different voltage
ranges
-15-