Performing The Test - MIR Smart One Bedienungsanleitung

2.4

Performing the test

In order to perform the test properly, please follow the instructions below.
Push the turbine into the slot until it stops
1
Insert the mouthpiece at least 0.5 cm into
the turbine socket.
3
Rev 2.0
Turn the turbine clockwise until it stops
2
Pick up the SMART ONE either at both
ends using both hands or, alternatively,
pick it up as if it were a cell phone.
Make sure not to obstruct the turbine
with your hand.
4
User Manual
Smart One
Page 8 of 216