Operating The Smart One; Inserting The Batteries; Installing The Mir Smart One Application; Configuring The Mir Smart One Application - MIR Smart One Bedienungsanleitung

2. OPERATING THE SMART ONE

2.1

Inserting the batteries

Follow the instructions in the Maintenance section for correct battery insertion.
2.2

Installing the MIR SMART ONE application

Before measuring the PEF or FEV1, you need to install the MIR SMART ONE application on
your smartphone.
iPhone devices
From your smart phone (iPhone model 4S or higher running iOS version 7 or higher) access
the App Store and install the MIR SMART ONE application.
2.2.1

Configuring the MIR SMART ONE application

Launch the MIR SMART ONE application and carry out the following steps. These are one-off
operations that do not need to be repeated next time you enter the application.
a) authorize data exchange with the Health application, which is already installed on your
smartphone.
The user can decide whether or not to allow
 the following data to be written to the Health application: height, weight, PEF and FEV1
 the following data to be read from the Health application: height, weight, date of birth,
gender.
You can allow or deny authorization for each parameter.
b) enter your personal details: date of birth, origin, weight, height, sex.
The MIR SMART ONE application will use these data to calculate standard PEF and FEV1
values, and will use them to attribute a traffic light colour to your test.
If you don't enter your data, a warning message will be issued.
2.3

Connection between SMART ONE and smartphone

Connection between the SMART ONE and the smartphone is automatic. To check whether
there is a connection, read the messages from the application.
Rev 2.0 User Manual
Smart One
Page 7 of 216