Troubleshooting - MIR Smart One Bedienungsanleitung

MESSAGE
Bluetooth
Battery low
It seems that you
have not configured
an e-mail account
4.2

Troubleshooting

PROBLEM
SMART ONE can't
connect with the
smartphone
The test results are
unreliable
Rev 2.0
POSSIBLE CAUSE
Bluetooth is off
When the SMART ONE
batteries are below 15%
The user wants to share the
results of the tests, but has not
configured an e-mail account
on their smartphone
POSSIBLE CAUSE
The Bluetooth connection is
not working properly
The turbine may be dirty
The test was performed
wrongly
The turbine has not been
inserted properly
User Manual
SOLUTION
To perform measurements with the
device, you
Bluetooth on the smartphone. Exit
the application
Bluetooth from the smartphone
settings menu.
Replace the SMART ONE batteries
Set up an e-mail account from the
smartphone settings menu
SOLUTION
Look for SMART ONE on the list of
recognized devices. For correct use,
the smart phone needs Bluetooth
version 4.0 or higher
Clean the turbine as described in the
Maintenance section.
If necessary, replace the turbine with
a new one, if necessary by contacting
the manufacturer
Repeat the test,
directions on the screen. Avoid
sudden movements when you finish
exhaling
Insert the turbine from the front of
the device by pushing it all the way
down and turning it clockwise. See
the Performing the test section
Page 17 of 216
Smart One
must activate
and activate
following the