Labels & Symbols - MIR Smart One Bedienungsanleitung

5. LABELS & SYMBOLS
ID label
The label shows:
 Product Name (REF)
 Device serial number (SN)
 Manufacturer's name and address
 Electrical safety symbol
 WEEE Symbol
 CE mark pursuant to Directive 93/42/EEC
 Antenna symbol for devices that include RF transmitters
 FCC ID number
 Degree of protection against penetration by external agents (IP22)
Symbol Description
This product is a certified Class IIa medical device, and complies with the requirements
of Directive 93/42/EEC
0476
In accordance with IEC 60601-1 the product and its applied parts are type BF and thus
protected against the risks of electrical leakage.
This symbol is required by European directive 2002/96/EEC on waste electrical and
electronic equipment (WEEE). At the end of its useful life this device must not be
disposed of as normal domestic waste. Instead it must be delivered to a WEEE
authorised collection centre.
As an alternative, the device may be returned without charge to the dealer or
distributor, when it is replaced by another equivalent device.
Due to the construction materials used for the device, disposal as normal waste could
cause harm to the environment and/or health.
Failure to observe these regulations can lead to prosecution.
IP22 Indicates the degree of resistance to liquids. The device is protected against falling
drops of water if it is disposed up to 15° from vertical.
Rev 2.0 User Manual
Smart One
Page 18 of 216