Before Use; Installation - CONGA Cecotec 3290 Bedienungsanleitung

ENGLISH
• Do not use the device to vacuum fl ammable or burning
objects such as cigarettes, matches or ash.
• Before operating the robot, please remove any object on
the fl oor such as clothing, papers, power cords or other
items that may obstruct the device.
• The appliance is not intended to be used by children under
the age of 8. It can be used by children over the age of 8, as
long as they are given continuous supervision.
• This appliance can be used by children aged 8 and above,
and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, as long as
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
• Supervise young children to make sure that they do not
play with the appliance. Close supervision is necessary
when the appliance is being used by or near children.

3. BEFORE USE

• Take the product out of the box and remove all packaging material.
• Make sure all parts and components are included and in good conditions. If any visible
signs of damage are observed, contact the Technical Support Service immediately.

4. INSTALLATION

Robot and charging base installation
1. Connect the charging base to a power supply and
store the remaining cable. It is important to store the
remaining cable at the bottom of the charging base to
avoid it from being dragged and disconnected.
2. Place the charging base against the wall, leaving the
safety distance indicated in the below picture.
Note: ensure a space of at least 1 m on both the left and right
side of the charging base, and a space of at least 2 m in front of it.
24
1m
1m
2m