Parts And Components; Before Use - CONGA 2299 ULTRA HOME X-TREME Bedienungsanleitung

ENGLISH

1. PARTS AND COMPONENTS

The graphics in this manual are schematic representations and may not exactly match the
product.
Fig. 1.1
Back Home
1.
2. Start/Pause button
3. Wi-Fi signal
4. Reset button
Light indicator:
- Flashing blue light: Back Home/charging
- Steady blue light: charged
- Red light: fault
Fig. 1.2
1. Back Home
Start/Pause button
2.
3. Wi-Fi signal
4. Anti-collision sensor
5. Top cover
Mixed-tank release button
6.
7. Free-detection sensor
8. Side brushes
9. Drive wheels
10. Mixed tank
11. Omnidirectional wheel
12. Battery
13. Main brush
Self-emptying base. Fig. 1.3:
1. Power socket
2. Cord storage compartment
Suction mouth
3.
4. Charging terminals
5. Light indicator
6. Self-emptying base lid
Dirt-disposal bag with 3-l capacity
7.
48
CONGA 2299 ULTRA HOME X-TREME

2. BEFORE USE

- This robot vacuum cleaner includes a package designed to protect it during transport. Take
the robot vacuum cleaner out of the box. Keep the original box and other elements in a safe
place, as this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box contents. Fig. 1.4:
1. Robot vacuum cleaner
Self-emptying base
2.
3. 2 side brushes
4. Mop and mop support
5. Connection cord
Self-cleaning brush
6.
7. Dirt-disposal bag
8. Mixed tank
9. Multifunctional brush
10. Instruction manual
11. Spare mop
Warnings
- Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 2
- If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed to
prevent product damage and ensure safe operation. Fig. 3
- Direct exposure to sunlight or great light contrasts may affect the correct operation of the
sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a new
location for it to start running again.
3. INSTALLATION
1. Place the self-emptying base against a wall and leave a minimum free space of 1.5 metres
to the front and 0.5 metre to each side. Fig. 4.
2. Plug the self-emptying base to a power socket. Wind and store the remaining cord in the
bottom part of the self-emptying base to avoid accidents.
ENGLISH
49
CONGA 2299 ULTRA HOME X-TREME