Side Brush - CONGA Cecotec 3290 Bedienungsanleitung

ENGLISH
WET & DRY TANK
1. Open the robot's cover and take out the dust tank.
2. Open the tank, take the high-effi ciency fi lter out and
empty the dust.
3. Use the cleaning brush to clean the inner part of the
tank and reinstall the high-effi ciency fi lter.
4. Introduce the tank back into the robot and close the top
cover.
HIGH-EFFICIENCY FILTER
Remove the high-effi ciency fi lter and shake it to remove all the dust.
Note:
• Replace the high-effi ciency fi lter every 3 months (depending on the frequency and type
of use).
• Clean the fi lter periodically with a brush to avoid blockage.
• Wash the fi lter with water and dry it thoroughly before reassembling it. Do not use
detergents.

SIDE BRUSH

Remove and clean the side brushes regularly.
Note: in order to ensure a perfect cleaning, it is suggested to replace
the side brushes every 3 months (depending on the frequency and type
of use).
34
1
3
2
4