CONGA Cecotec 3290 Bedienungsanleitung Seite 30

ENGLISH
Schedule
The robot is provided with a schedule function in order to provide a maximum-effi ciency
cleaning. The time settings and the cleaning schedules must be carried out from the App.
Once the robot has been scheduled, it will automatically carry out the cleaning cycles every
scheduled day.
Note: make sure the robot is activated and that the light indicator is lighted before
scheduling any cleaning or setting time.
Light indicator:
• Operating: steady blue light
• Recharging/low power: orange light blinks slowly
• Charging: orange light oscillates
• Network confi guration: light fl ashes slowly
• Start-up/fi rmware update: blue light oscillates
• Error: red light fl ashes quickly
Modes
The fi rst time the robot is operated, it will map and memorize the whole house by means of its
laser before starting the cleaning cycle. Use the robot in auto mode and eco power level, this
way you will ensure the robot memorizes the map 100 %.
Note: Make sure the light indicator is lighted in blue before starting cleaning, indicating it is
activated. If it is not, press any button on the App to wake it up.
1. Auto mode
Press on the App for it to start cleaning automatically; fi rst
a cleaning cycle in Edge mode and then another cycle in and
organized zig zag motion, recognizing which areas it has cleaned
and which ones it has not. The robot will plan the cleaning route
automatically as it is cleaning. If during this mode the robot is
controlled manually, the robot will calculate the route again and
could go through previously cleaned areas. In order to ensure
effi cient cleaning, do not operate it manually during auto mode cleaning.
Thanks to its TotalClean 2.0 technology, if the battery is low during the cleaning cycle, the
30