SUHNER ABRASIVE LGS 30 Gebrauchsanleitung Seite 5

Change of tools/abrasives
• Disconnect air supply before changing tools/
abrasives
• Separate cover 1 from the housing 2 (right-
hand-thread). Push plate with stylus 12 or
chisel 13,14 out of the bush.
Attention: spring 7,15 and O-ring 8 are loose
parts.
Maintenance
• Store tool in a clean, dry place
• Even if the tool still gives satisfactory service,
have it checked by a trained mechanic after
300 to 400 operation hours, or at least once a
year. Disassembly motor, and clean it.
• Warranty claims can only be considered, if
tool is returned complete.
Accessories:
All accessories can be found in theSUHNER®
Abrasive Power Tool catalog.
Subject to change.