Application; Version - Brink Renovent Excellent 400 Installationsvorschriften

Chapter 2
The Brink Renovent Excellent is a ventilation unit with heat
3
pacity of 400 m /h and low-energy fans. Features Renovent
Excellent:
indication on the multiple switch;
• a completely new intelligent frost protection system which
ensures that also at low outdoor temperatures the applian-
ce's performance remains optimal and that, if necessary, it
activates the standard preheater.
• low sound level
• comes as standard with automatic bypass valve
• low energy consumption
Renovent Excellent 400 is available in two types:
• Renovent Excellent"
• Renovent Excellent Plus"
Compared to the Renovent Excellent, the Renovent Excellent
Plus has a more extensive control board which increases the
connection options.
Type
Renovent Excellent
Renovent Excellent Plus
4
Version types Renovent Excellent 400
Version L of R Position air ducts
4 top connections
Left-handed version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
4 top connections
Right-hand version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
4 top connections
Left-handed version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
4 top connections
Right-hand version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
Renovent Excellent
These installation instruction describe both the standard Reno-
- vent Excellent and the Renovent Excellent Plus.
The Renovent Excellent (Plus) is available in the left-handed
air ducts differs for these two versions! For the correct position
of the connection ducts and dimensions see §3.4.1 or §3.4.2.
respectively.
When ordering an appliance always state the correct type; sub-
sequent conversion to a different version is not possible.
The Renovent Excellent comes ready to plug in with a 230 V
mains plug and a connection for a low-voltage multiple switch
on the outside of the appliance.
Note: When replacing a Renovent Large by a Renovent
Excellent, do realise that the positions of the ducts
"From dwelling" and "From atmosphere" are diffe-
rent! (only for type 4/0 & 3/1) Carefully check the po-
sition of these ducts on the basis of the connection
drawings §3.4.1 and §3.4.2.

Application

Power supply Type code
Power plug 4/0 L
Power plug 2/2 L
Power plug 3/1 L
Power plug 4/0 R
Power plug 2/2 R
Power plug 3/1 R
Power plug 4/0 L+
Power plug 2/2 L+
Power plug 3/1 L+
Power plug 4/0 R+
Power plug 2/2 R+
Power plug 3/1 R+