Application - Brink Renovent Excellent 300 Plus Installationsvorschriften

Application

The Brink Renovent Excellent is a ventilation unit with heat re-
city of 300 or 400 m 3 /h and low-energy fans. Features Reno-
vent Excellent:
indication on the multiple switch;
ensures that also at low outdoor temperatures the applian-
ce's performance remains optimal and that, if necessary, it
activates the standard preheater.
Renovent Excellent 300/400 is available in two types:
Compared to the Renovent Excellent, the Renovent Excellent
Plus has a more extensive control board which increases the
connection options.
Type
Renovent Excellent
Renovent Excellent Plus
Version types Renovent Excellent 300/400
Version L of R Position air ducts
4 top connections
Left-handed version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
4 top connections
Right-hand version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
4 top connections
Left-handed version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
4 top connections
Right-hand version 2 top connections & 2 bottom connections
3 top connections & 1 bottom connection
Renovent Excellent
These installation instruction describe both the standard Reno-
- vent Excellent and the Renovent Excellent Plus.
The Renovent Excellent (Plus) is available in the left-handed
air ducts differs for these two versions! For the correct position
of the connection ducts and dimensions see §3.4.1 or §3.4.2.
respectively.
When ordering an appliance always state the correct type; sub-
sequent conversion to a different version is not possible.
The Renovent Excellent comes ready to plug in with a 230 V
mains plug and a connection for a low-voltage multiple switch
on the outside of the appliance.
Note: When replacing a Renovent Large by a Renovent
Excellent, do realise that the positions of the ducts
rent! (only for type 4/0 & 3/1) Carefully check the
position of these ducts on the basis of the connec-
tion drawings §3.4.1 and §3.4.2.
Chapter 2
Power supply Type code
Power plug 4/0 L
Power plug 2/2 L
Power plug 3/1 L
Power plug 4/0 R
Power plug 2/2 R
Power plug 3/1 R
Power plug 4/0 L+
Power plug 2/2 L+
Power plug 3/1 L+
Power plug 4/0 R+
Power plug 2/2 R+
Power plug 3/1 R+
5
-