Connection Examples Multiple Switch - Brink Renovent Excellent 400 Installationsvorschriften

Chapter 11

11.2 Connection examples multiple switch

A multiple switch can be connected to the modular connector X2 of the Renovent Excellent. This modular connector X2 is directly
accessible at the rear of the display cover (see §11.1) without having to take it off.
230 V
50 Hz
A = Renovent Excellent
230 V
50 Hz
230 V
50 Hz
A = Renovent Excellent
C = Splitter
30
Electric connections accessories
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable use, the "tab" of both modular connectors must be
mounted facing the mark on the modular cable.
11.2.4 Additional multiple switch with wireless
remote control
230 V
50 Hz
E2365-A
A = Renovent Excellent
C = Receiver for wireless remote control
D = Transmitter with 2 settings
E = Splitter
Renovent Excellent
A = Renovent Excellent
B = Receiver for wireless
remote control
C = Transmitter with 4 settings
(e.g. kitchen)
D = Transmitter with 2 settings
(e.g. bathroom)
E = Any additional 2- or 4-settings trans-
mitters (A maximum of 6 transmitters
can be signed on to 1 receiver)
E2365-A