Message Text For Operating Mode - Brink Renovent Excellent 400 Installationsvorschriften

Chapter 6

6.2.3 Message text for operating mode

This part of the display may show a message text. The
message text "Filter" always takes precedence over the
other message texts.
The following message text may appear during operating
mode.
Message text Description
on display
FILTER When the text "FILTER" ap-
must be cleaned or replaced;
for detailed information, see
§ 9.1
Slave 1, Slave For coupled appliances the
2 etc. message text shelves which
appliances "Slave 1" - "Slave
9"; for detailed information, see
§11.3.
The "Master" appliance dis-
plays the regular image regar-
ding ventilation mode.
EWT When the text "EWT" appears
on the display, the geo heat
(only for Plus exchanger is active.
version) For extensive information, also
see §11.5.
CN1 or CN2 When the text "CN1 or CN2"
appears on the display, one of
(only for Plus the external switch inputs is
version) active, also see §11.6.
V1 or V2 When the text "CN1 or CN2"
appears on the display, one of
(only for Plus the external 0 - 10 V inputs is
version) active, also see §11.7.
16 Renovent Excellent
Display
Master - appliance
Slave - appliance
6245-B
6250-A
6248-A