Cleaning And Maintenance - Stryker WiSe Bedienungsanleitung

Cleaning and Maintenance

Caution
No specific liquid or chemical is necessary for cleaning the display. Use only
non-abrasive cloths and cleaning solutions to clean similar equipment used in
hospitals. Disconnect the display and transmitter from the AC power before
cleaning.
1. Clean the plastic areas of the display with a dry, soft cloth, or a soft cloth
lightly moistened with mild detergent solution. Do not use any type
of solvent, such as alcohol or benzine, which might damage the finish.
Acceptable cleaning agents for bezel cleaning include:
• Cidex (2.4% glutaraldehyde solution)
• 0.5% Chlorhexidine in 70% isopropyl alcohol
2. Apply alcohol to glass surfaces with a soft cotton applicator to aid in
cleaning and drying without leaving spots or streaks.
3. Clean the display filter with a dry, soft cloth, or soft cloth lightly
moistened with warm water. Other acceptable cleaning agents are listed
below:
• 70% isopropyl alcohol
• Cidex (2.4% glutaraldehyde solution)
• 0.5% Chlorhexidine in 70% isopropyl alcohol
4. Dry thoroughly with a soft towel or gauze surgical sponge.
Do not expose the display to moisture or apply liquid
cleaners directly to the screen. Spray the cleaning solution
into a soft cloth and clean the screen gently.
25