Using.the.on-Screen.display - Stryker WiSe Bedienungsanleitung

Using the On-Screen Display
The device on-screen display helps navigate through various device menus.
Press the Rotary Control to activate the on-screen display (OSD) menu.
1.
Rotate the Rotary Control to move up or down through the menu.
2.
The parameter will be highlighted when selected.
Press the Rotary Control to enter the next level OSD.
3.
Rotate the Rotary Control to increase or decrease the value of the
4.
selected parameter, or to make a selection on different options.
5. To exit the OSD menu screen from the second — or third — level OSD
menu, select the Exit option. To completely exit the OSD, press and hold
the Rotary Control. If no keys are pressed, the OSD will automatically
exit.
While the OSD menu is deactivated, rotate the Rotary Control to
6.
activate the input signal selection menu. The current input signal will
be indicated by a dot. Rotate the Rotary Control to select the preferred
input signal.
Stryker Camera Preset Modes
Camera
988
988i
1088/SDC Pro2
1088i/SDC Pro2
1088/1188/SDC HD
1088i/1188i/SDC HD
1188w720
1188iw720
Resolution
(H × V)
1024 × 768
1024 × 768
1024 × 768
1024 × 768
1280 × 1024
1280 × 1024
1280 × 720
1280 × 720
Horizontal
Frequency
(KHz)
49.09
41.25
50.03
41.10
64.02
59.99
45.00
37.50
Vertical
Frequency
(Hz)
59.90
50.00
60.00
50.00
60.10
50.00
60.00
50.00
15