Video Cable - Panasonic WV-BP330 Bedienungsanleitung

C. WV-BP334 (24V AC 50Hz)
Connect the power cable to the AC 24V IN termi-
nal on the rear panel of the WV-BP334.
1 2
24 V AC, 50 Hz
(19.5 V - 28 V)
Recommended wire gauge sizes for 24V AC line
Copper wire #24 #22
size (AWG) (0.22mm 2 ) (0.33mm
Length (m) 95 150
of Cable
(Approx.) (ft) 314 495

Video Cable

1. It is recommended to use a monitor whose resolu-
2. Set the termination switch to the 75Ω position on
#20 #18
2 ) (0.52mm 2 ) (0.83mm 2 )
255 425
842 1 403
-10-
tion is at least equal to that of the camera.
the last monitor.
A. Use a 75Ω coaxial cable.
B. Set the termination switch to the 75Ω posi-
tion on the last monitor and to the Hi-Z posi-
tion on the other monitors. Do not change the
positions after setting.
Monitor
VIDEO
IN OUT 75 ¶
Hi-Z
C. The maximum extensible coaxial cable
length between the camera and the monitor is
shown below.
Monitor
VIDEO
IN OUT 75 ¶
Hi-Z