Symbols - GGP ITALY MONO Gebrauchsanweisung

SYMBOLS

2. SYMBOLS
1
5
1) Warning! Danger. The failure to use this ma-
chine correctly can be hazardous for oneself and
others.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher.
Wear earmuffs or earplugs and a protective hel-
met.
4) Wear gloves and protective footwear!
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
11
12
a b
13
14
15
2
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
13) Choke
14) Primer
15) Correct position
of the handgrip
on the drive tube
3 4
6 7
5) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
6) Do not use the circular saw blade. Danger:
Using the circular saw blade with machines
marked with this symbol exposes the user to
the danger of very serious or even fatal inju-
ries.
7) Maximum cutting device speed. Only use sui-
table cutting devices.
8) Warning! - Petrol is flammable. Allow engine
to cool at least 2 minutes before refuelling.
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
21
22
23
8
-1
min
21) Cutting device
with adequate
protection
22) To be used with
the cutting line
head
23) Cutting device
rotation direction
3
EN