Santec VCHD-1622 Bedienungsanleitung Seite 37

Bedienungsanleitung / User manual
VCHD-1622 / VCHD-2622 / VCHD-2792IR / VCHD-4322IR
Special:
Setting options:
Cam Title:
The monitor name is displayed in the video image.
D-Effect:
o Freeze: Freezes the image.
o Mirror: Mirrors the image.
o D-Zoom: Digital zoom up to 62x.
o Pan/Tilt: Panning and tilting for D-zoom.
o Smart Zoom: When motion is detected, it automatically zooms-in with the set
zoom ratio. When D-zoom is enabled, this function is disabled.
o Negative Image: Can be enabled or disabled.
o DIS: Digital image stabilisation. No function for this camera.
Motion:
Detection of motion in the video image. Up to 4 areas can be defined.
Privacy:
Up to 8 areas can be defined which will be masked in the video image.
Language:
Choose your preferred OSD language (16 languages are available).
Defect:
Use this mode when „Dead Pixel" occur in the image.
o Live DPC: Corrects „Dead Pixel" when the camera is active.
o Static PDC: Corrects „Dead Pixel" when the camera is firstly used.
RS-485:
Pelco-D is supported (optional).
Version:
The current firmware version is displayed.
Adjust:
Setting options:
Sharpness:
Set the sharpness from 0 to 15.
Monitor:
Choose CRT or LCD monitor.
LSC:
Lens Shading Correction.
Resolution:
Set the resolution: 1080 or 720
720/1080:
Choose 25P or 50P.
Video Out NTSC/PAL:
Choose your TV system.
Return:
Return to main menu.
NOTE ! The 1080 / 50P mode performs a half distance than other modes
and is not supported from all devices like DVR, etc.
_________________________________________________________________________________
- 37 -