Vchd-2622 - Santec VCHD-1622 Bedienungsanleitung

Bedienungsanleitung / User manual
VCHD-1622 / VCHD-2622 / VCHD-2792IR / VCHD-4322IR

4.2 VCHD-2622

Lens:
To achieve the correct angle of view, turn the zoom ring until you get from a wide angle to a
near angle or vice versa. Use the second ring to adjust the sharpness.
3-axis adjustment:
The camera module can be set via 3 axis which makes it possible to have customised
setting, e.g. in case of wall mounting.
1. turn the whole bracket
2. up and down
3. turn the camera module (loosen the screw and tight it again after adjustment has
been completed)
For making adjustments, loosen the screws carefully.
After the adjustments have been made, tighten the screws again carefully.
Picture 1:
Open here
Picture 3:
Lens adjustment
_________________________________________________________________________________
Picture 2:
Joystick
Picture 4:
The arrows mark the 3-axis adjustment options
- 29 -
Additional video output (via
adapter), e.g. to connect a
monitor during the
installation phase
Screw