Bedienungsanleitung / User manual
VCHD-1622 / VCHD-2622 / VCHD-2792IR / VCHD-4322IR
4.3 VCHD-4322IR
Note:
At the installation, please ensure that the little holes next to the screws are not blocked or
clogged! In case of backwater, these little holes ensure that the water leaves the camera
housing.
Lens:
Lens control (focal length and focus) is done by the two setting rings. Carefully loosen the
two safety screws a bit so that you are able to turn the setting rings. Adjust the lens
according to your needs. Finally, seize the two safety screws again carefully (see picture 4).
Picture 1:
Housing for
surface mount
All dimension in mm.
_________________________________________________________________________________
- 31 -
Housing for
ceiling mount