Bedienungsanleitung / User manual
VCHD-1622 / VCHD-2622 / VCHD-2792IR / VCHD-4322IR
1. Items included in the delivery
1x Camera (VCHD-1622, VCHD-2622, VCHD-2792IR or VCHD-4322IR)
1x Cable adapter BNC socket/plug
1x Sunshield (only for VCHD-2792IR)
1x Surface mount adapter and lock screw (only for VCHD-4322IR)
1x Power cable with open end
1x Allen wrench (only for VCHD-2792IR and VCHD-4322IR)
1x User manual
2. Installation
Also see the pictures on the following pages.
You will find the technical data at the end of the manual.
2.1 Camera mounting
Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. Ensure that the camera is safely installed by using only suitable screws.
2.2 Power supply
Only use a stabilised 12 V DC or 24 V AC power supply unit with sufficient wattage (see
chapter "Technical specifications" for recommended power supply units).
Only approved cables should be used.
Power supply is being connected to the red cable plug (mid pin +, outside -) (for DC
operation)
A cable adapter BNC socket/plug is included in the delivery which can be put onto the
additional video output (PAL), e.g. to connect a monitor during the camera installation.
2.3 Camera housing
VCHD-1662 and VCHD-2792IR:
The camera housing must not be opened! All camera adjustments and connections are
accessible from the outside.
Improper handling of the appliance will invalidate the warranty.
VCHD-2622 and VCHD-4322IR:
Carefully open the housing by turning it to the left. Close it again by turning it to the right.
Also see the pictures on the following pages.
Clean the dome after the installation.
Improper handling of the appliance will invalidate the warranty.
_________________________________________________________________________________
- 26 -