Technical Specifications - Vitek VT-2542 GY Die Betriebsanweisung

– Remove the blade block (5) by pressing the
top part of the block from the blade side.
Clean the blade block (5) and the inner side
under the blade block (5) with the clean-
ing brush (13). Fix the blade block (5) to its
place by inserting the clamp of the block to
the groove on the unit body and pressing
the top part of the block. Clicking of clamps
indicates correct positioning of the blade
block (5).
– Never use solvents or abrasives to clean the
hair clipper set.
– Oil the blades with the cleaning oil (12) after
each use.
STORAGE
– Clean the unit and lubricate the blades with
lubricating oil (12) before taking the unit
away for storage.
– Keep the unit away from children in a dry
cool place.
DELIVERY SET
1. Hair clipper (with blades) – 1 pc.
2. Attachment comb – 2 pcs.
3. Power adapter – 1 pc.
4. Base – 1 pc.
VT-2542.indd 7
5. Oil – 1 pc.
6. Brush – 1 pc.
7. Comb – 1 pc.
8. Scissors – 1 pc.
9. Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power input of the power adapter: AC 100-
240V, ~ 50/60Hz
Output voltage: DC 3 V, 600 mA
Maximal power consumption: 6 W
The manufacturer reserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim un-
der the terms of this guarantee.
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/108/ЕС and
to the Low Voltage Regulation (2006/95/ЕС)
7
ENGLISH
12.09.2013 17:09:32